Lifting column F1600-LIFT350MM
- Three lifting modules with different maximum lifting and pressure forces as well as lifting velocities for the continuous height adjustment of workplaces even under high loads.
- Three lifting lengths per variant
- Attachment by means of mounting plates at the face sides or using the integrated 10 mm slot
- Incl. Connection cable; cable length: ~2m
- Cable possible on the left or right side
- Diagonal cover cap prevents crushing risk
- All lifting modules are electrostatic discharge-enabled
- Mounting plates are connected in a conductive manner
- Attachment bracket set suitable for F1000, F1600 or F3200 lifting modules for lateral profile attachment (grid dimension 45mm)
- Notice: According to DIN EN 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements - 15.1 Sockets for accessories, the following applies: If the machinery or its associated equipment is equipped with outlets intended for accessories (e.g. hand-held power-operated tools, test equipment), the following shall apply:[...]- circuits supplying outlets with a rated current not exceeding 20 A shall be additionally protected by a residual current device (RCD) with a rated differential current of ≤ 30 mA.
Technical data
| Property | Value |
|---|
| Force F [N] | 1600 |
| Length [L] | 350 |
| Compression load [Fmax] [N] | 1600 |
| Tensile load [Fmax] [N] | 1200 |
| Maximum load version [Fmax] [N] | 1600 |
| Speed | 18 |
| Tilting torque [Mx] [Nm] | 500 |
| Tilting torque [My] [Nm] | 250 |
| Weight [kg] | 11.2 |
Item data
| Property | Value |
|---|
| Manufacturer | Bosch Rexroth |
| Part number | 3 842 559 963 |
| Designation | LIFT MODULE F1600-LIFT350MM |
| Product area | Manual and configurable production systems › Components and self-assembly elements › Components for ergonomic workstations › Table frames › Components for height-adjustable workstations |
Manufacturer data sheet and CAD data available on request.
