Bosch Rexroth Feet and Wheels

Secure footing for profile structures

Frames, workstations and machine bases built from aluminum profiles need a defined contact with the floor. Feet compensate for uneven floors, allow the structure to be levelled and distribute the load. Where structures must not move, they are anchored to the floor; where vibrations occur, damping plates are used. Wheels are also available for mobile setups.

Versions and selection criteria

• Foot plates for profiles to suit cross-sections such as 40x40, 45x45, 45x90, 80x80 or 90x90.
• Foot plates with diameter sizes such as D29 or D39, also in plastic (PA) or black zinc-plated.
• CGP foot plates and large plates such as 120x120 or 150x150 for higher loads and anchoring.
• Damping plates from D29 to D79 to reduce vibration and structure-borne noise and to protect sensitive floors.
• Anchors such as M8 and M10 for floor fixing.

Choose feet according to the profile cross-section, expected load, required height adjustment and whether the structure should be fixed or mobile.

Feet and wheels at KSK Components

KSK Components offers Bosch Rexroth levelling feet and castors alongside a wide range of wheels and castors from other manufacturers such as Blickle and TENTE. Registered business customers see their individual customer group prices in the shop.

Frequently asked questions

When do I need floor anchoring?

Tall, narrow or dynamically loaded structures and guarding should be fixed to the floor using a foot plate and anchor.

What do damping plates do?

They reduce the transmission of vibrations between machine and floor and can therefore lower noise levels.

Do the foot plates fit every profile?

Foot plates are matched to specific profile cross-sections; the size is stated in the product name.